Extrudr · ASA-GF filament
Extrudr ASA-GF print temperature and settings
The settings Extrudr publishes for its ASA-GF: 240 °C at the nozzle and 110 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Print settings
| Nozzle | 240 °C | |
|---|---|---|
| Bed | 110 °C | |
| Density | 1.1 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 2 ASA-GF lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Extrudr sells.
| Spool | 1.75 mm |
|---|---|
| 750 g | ≈ 283 m |
1 Extrudr ASA-GF colors
- DuraPro - Nature
Check prices for Extrudr ASA-GF on Amazon.As an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Extrudr ASA-GF at?
Extrudr lists 240–240°C at the nozzle and 110–110°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Extrudr ASA-GF?
About 378 m at 1.75 mm, from its published density of 1.1 g/cm³.
How many colors does Extrudr ASA-GF come in?
1 in the data we track, including DuraPro - Nature.