Extrudr ASA-CF print temperature and settings
The settings Extrudr publishes for its ASA-CF: 260 °C at the nozzle and 110 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Extrudr's recommended nozzle range is right in line with the typical ASA-CF across the 5 ASA-CF lines we track (median 250–270°C).
Print settings
| Nozzle | 260 °C | |
|---|---|---|
| Bed | 110 °C | |
| Density | 1.14 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 5 ASA-CF lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Extrudr sells.
| Spool | 1.75 mm |
|---|---|
| 750 g | ≈ 274 m |
| 2 kg | ≈ 729 m |
Printing ASA-CF (carbon fiber ASA)
Full ASA-CF (carbon fiber ASA) guide →ASA reinforced with chopped carbon fiber: stiffer and more dimensionally stable than plain ASA, with a matte finish.
1 Extrudr ASA-CF colors
- DuraPro - Black
Frequently asked questions
What temperature should I print Extrudr ASA-CF at?
Extrudr lists 260–260°C at the nozzle and 110–110°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Extrudr ASA-CF?
About 365 m at 1.75 mm, from its published density of 1.14 g/cm³.
How many colors does Extrudr ASA-CF come in?
1 in the data we track, including DuraPro - Black.