eSun TPU-95A print temperature and settings
The settings eSun publishes for its TPU-95A: 240 °C at the nozzle and 60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
eSun's recommended nozzle range is about 3°C hotter than the typical TPU-95A across the 4 TPU-95A lines we track (median 235–240°C).
Print settings
| Nozzle | 240 °C | |
|---|---|---|
| Bed | 60 °C | |
| Density | 1.21 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 4 TPU-95A lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size eSun sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 344 m |
Printing TPU 95A
Full TPU 95A guide →The most common, firmest everyday grade of TPU: flexible but stiff enough to feed reliably on most printers.
13 eSun TPU-95A colors
- Black
- Change by temp
- Grey
- Natural
- Rainbow
- Tansparent Blue
- Transparent Green
- Transparent Orange
- Transparent Pink
- Transparent Purple
- Transparent Red
- Transparent Yellow
- White
Frequently asked questions
What temperature should I print eSun TPU-95A at?
eSun lists 240–240°C at the nozzle and 60–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of eSun TPU-95A?
About 344 m at 1.75 mm, from its published density of 1.21 g/cm³.
How many colors does eSun TPU-95A come in?
13 in the data we track, including Black, Change by temp, Grey and Natural.