eSun ABS+ print temperature and settings
The settings eSun publishes for its ABS+: 240 °C at the nozzle and 100 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
eSun's recommended nozzle range is right in line with the typical ABS+ across the 4 ABS+ lines we track (median 238–245°C).
Print settings
| Nozzle | 240 °C | |
|---|---|---|
| Bed | 100 °C | |
| Density | 1.06 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 4 ABS+ lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size eSun sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 392 m |
Printing ABS+
Full ABS+ guide →A modified ABS that most brands tune for less warping, with the same heat resistance and the same need for an enclosure.
16 eSun ABS+ colors
- Black
- Blue
- Brown
- Cold White
- Fire Engine Red
- Green
- Light Blue
- Natural
- Orange
- Peak Green
- Pine Green
- Pink
- Red
- Silver
- Solid Grey
- Yellow
Frequently asked questions
What temperature should I print eSun ABS+ at?
eSun lists 240–240°C at the nozzle and 100–100°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of eSun ABS+?
About 392 m at 1.75 mm, from its published density of 1.06 g/cm³.
How many colors does eSun ABS+ come in?
16 in the data we track, including Black, Blue, Brown and Cold White.