add:north · PVDF+GRAPHENE filament
add:north PVDF+GRAPHENE print temperature and settings
The settings add:north publishes for its PVDF+GRAPHENE: 290 °C at the nozzle and 60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Print settings
| Nozzle | 290 °C | |
|---|---|---|
| Bed | 60 °C | |
| Density | 1.76 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 1 PVDF+GRAPHENE lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size add:north sells.
| Spool | 1.75 mm |
|---|---|
| 100 g | ≈ 24 m |
| 250 g | ≈ 59 m |
1 add:north PVDF+GRAPHENE colors
- Koltron G1 - Black
Check prices for add:north PVDF+GRAPHENE on Amazon.Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print add:north PVDF+GRAPHENE at?
add:north lists 290–290°C at the nozzle and 60–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of add:north PVDF+GRAPHENE?
About 236 m at 1.75 mm, from its published density of 1.76 g/cm³.
How many colors does add:north PVDF+GRAPHENE come in?
1 in the data we track, including Koltron G1 - Black.