add:north · PVDF filament
add:north PVDF print temperature and settings
The settings add:north publishes for its PVDF: 250 °C at the nozzle and 55 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Print settings
| Nozzle | 250 °C | |
|---|---|---|
| Bed | 55 °C | |
| Density | 1.3 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 1 PVDF lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size add:north sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 320 m |
1 add:north PVDF colors
- Adamant S1 - White
Check prices for add:north PVDF on Amazon.
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print add:north PVDF at?
add:north lists 250–250°C at the nozzle and 55–55°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of add:north PVDF?
About 320 m at 1.75 mm, from its published density of 1.3 g/cm³.
How many colors does add:north PVDF come in?
1 in the data we track, including Adamant S1 - White.