add:north · PLA+WOOD filament
add:north PLA+WOOD print temperature and settings
The settings add:north publishes for its PLA+WOOD: 215 °C at the nozzle and 60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Print settings
| Nozzle | 215 °C | |
|---|---|---|
| Bed | 60 °C | |
| Density | 1.15 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 2 PLA+WOOD lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size add:north sells.
| Spool | 1.75 mm |
|---|---|
| 500 g | ≈ 181 m |
| 1 kg | ≈ 362 m |
2 add:north PLA+WOOD colors
- PLA Wood - Light Oak
- PLA Wood - Nordic Birch
Check prices for add:north PLA+WOOD on Amazon.Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print add:north PLA+WOOD at?
add:north lists 215–215°C at the nozzle and 60–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of add:north PLA+WOOD?
About 362 m at 1.75 mm, from its published density of 1.15 g/cm³.
How many colors does add:north PLA+WOOD come in?
2 in the data we track, including PLA Wood - Light Oak and PLA Wood - Nordic Birch.