add:north · PA-CF filament
add:north PA-CF print temperature and settings
The settings add:north publishes for its PA-CF: 270 °C at the nozzle and 60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Print settings
| Nozzle | 270 °C | |
|---|---|---|
| Bed | 60 °C | |
| Density | 1.2 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 1 PA-CF lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size add:north sells.
| Spool | 1.75 mm |
|---|---|
| 500 g | ≈ 173 m |
| 1 kg | ≈ 346 m |
1 add:north PA-CF colors
- Adura X - Black
Check prices for add:north PA-CF on Amazon.
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print add:north PA-CF at?
add:north lists 270–270°C at the nozzle and 60–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of add:north PA-CF?
About 346 m at 1.75 mm, from its published density of 1.2 g/cm³.
How many colors does add:north PA-CF come in?
1 in the data we track, including Adura X - Black.