3DXTECH · PC+ABS filament
3DXTECH PC+ABS print temperature and settings
The settings 3DXTECH publishes for its PC+ABS: 280 °C at the nozzle and 115 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Print settings
| Nozzle | 280 °C | |
|---|---|---|
| Bed | 115 °C | |
| Density | 1.14 g/cm³ | |
| Diameters | 1.75 mm, 2.85 mm | |
Bars run on a fixed scale; the dashed line is the median of the 1 PC+ABS lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size 3DXTECH sells.
| Spool | 1.75 mm | 2.85 mm |
|---|---|---|
| 500 g | ≈ 182 m | ≈ 69 m |
| 2 kg | ≈ 729 m | ≈ 275 m |
2 3DXTECH PC+ABS colors
- 3DXMAX™ Black
- 3DXMAX™ White
Check prices for 3DXTECH PC+ABS on Amazon.As an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print 3DXTECH PC+ABS at?
3DXTECH lists 280–280°C at the nozzle and 115–115°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of 3DXTECH PC+ABS?
About 365 m at 1.75 mm, from its published density of 1.14 g/cm³.
How many colors does 3DXTECH PC+ABS come in?
2 in the data we track, including 3DXMAX™ Black and 3DXMAX™ White.